2X Manual Fuel Transfer Pump for Oil Petrol 150cm

Description: The Hose is Made of PVC, flexible corrosion resistant and clear, you can easily see the water flow. With oil suction pump, you can make a small oil change, transfer petrol into a canister or refill the tank.Wide used for petrol petrol oil water and other common liquids, Also can be a water changer for aquariumEasy to use, Just insert the oil inlet pipe into the bottom of the fuel tank, and insert the oil discharge pipe into the prepared fuel tank, press the rubber ball 3-5 times and the liquid automatically flows out. Fast oil speed, easy to use, easy to carry Specification: Material: Rubber+Aluminium alloy.Size: Approx. 26.6 x 17.8 x 6.4cm/10.5 x 2.5 inch Tube inner diameter 16 mm; outer diameter 20 mm.Hose length: 150cm/200cm/300cm/500cm (Options)Features: Resistant to petrol and ageing. Opening pressure: 0.2 bar.Working pressure range: 0.2-6 bar.Temperature range: -30 °C to +130 °C. Package Includes: 1x Suction ball 1 x Hose2 x Valve clips(2 Pack) Note: According to the arrow, identify the inlet and outlet pipes. Disconnect the oil pipe.Insert the oil inlet hose into the fuel tank and touch the bottom of the fuel tank.Insert the oil line into the prepared oil barrel.Squeeze the rubber ball 3–5 times.Then the liquid automatically flows off.Note: This hand pump is suitable for the fuel tank that does not contain a theft-proof oil filter.The height of the oil inlet is higher than the height of the oil outlet.Clean it soon after use to avoid clogging the oil pipe. Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....